Car Won't Start in Sevierville? Simple Checks Before You Call a Tow

A car that will not start is one of the most common reasons Sevierville drivers need roadside help. A few quick checks can tell you whether it is something simple or whether the car needs to go to a shop.

First, listen to what happens

• Nothing at all, no lights: usually a dead battery or a loose or corroded battery cable.
• Rapid clicking: the battery has some charge but not enough to turn the engine. A jump start often helps.
• One loud click: could be the starter motor or a bad connection.
• Engine cranks but will not fire: often fuel, ignition, or a sensor problem rather than the battery.

Quick checks you can do safely

• Make sure the car is in park (or neutral) and your foot is firmly on the brake.
• Try your spare key; a weak key fob battery can stop push-button starts.
• Check the fuel gauge. It sounds obvious, but it happens.
• Turn the steering wheel slightly while turning the key if the wheel is locked.
• Look for warning lights such as a security or immobilizer light.

When to stop trying

Cranking over and over can drain the battery and overheat the starter. If several tries fail, or you smell fuel or see smoke, stop and call for help. A jump start or battery test can fix many no-start problems on the spot; the rest usually need a tow to a shop.

Need a tow or roadside help?

Sevierville Towing offers 24/7 towing and roadside help across Sevierville, Kodak, Boyds Creek, and Wears Valley.